|
 Clean Cargo Working Group Environmental Performance Survey
Environmental Policy
Environmental Management System (EMS)
Please describe your Environmental Management Program
Your environmental management objectives:
|
|
Read more...
|
|
|
 Questions relating to responsibility, authority and contractual issues can be complicating factors when damage occurs whilst a vessel is at a repair yard or in
dry dock. The questions are mostly related to who is responsible for the damage occurring and the resulting
repair costs. Is it the vessel’s owners or the yard?
In some cases, owners have not even been aware that the yard has limited its liability in the contract.
|
|
Read more...
|
 Regulations for the Prevention of Air Pollution from Ships
The following table is a proposed checklist for Owners preparing for the implementation of Annex VI of MARPOL 73/78 and the initial survey to obtain the required International Air Pollution Prevention (IAPP) Certificate.
19 May 2005 Annex VI to MARPOL entered into force. The revised Annex VI to MARPOL was adopted by IMO on 10 October 2008.
Infomarine On-Line Technical Library
| File | Description | File size |
|---|
 Marpol annex VI 2009 guide_tcm4-425180.pdf | Marpol 73/78 Annex VI Regulations for the Prevention of Air Pollution from Ships Owners’ Annex VI Checklist | 8930 Kb |
|
|
Read more...
|
|
|
 This guideline is prepared by Det Norske Veritas for ship owners, operators, yards and service suppliers approved for thickness measurements of ship's structure, in order to facilitate co-operation through a common understanding of the procedures for UTM ( ultrasonic thickness measurements) at Class Surveys. CAP is not covered by this guide.
Steel plates in the deck being replaced after UTM. Evenly corroded steel plates might look perfectly acceptable even at close-up distance. Thus, thickness measurements are an essential part of class surveys.
Infomarine On-Line Technical Library
| File | Description | File size |
|---|
| DNV ultrasonic_UTM_tcm4-77272.pdf | Guideline for Ultrasonic Thickness Measurements of ships classed with Det Norske Veritas | 3137 Kb |
|
|
Read more...
|
|
 To the Owner/Superintendent/ Master
Your vessel will be undergoing inspection by a P & I condition surveyor to facilitate the provision of P & I cover by Maritime Mutual Insurance Association (NZ) Ltd.
The inspection will be accomplished by using a comprehensive check list. The surveyor will need to be accompanied by a Senior Officer throughout the course of the inspection to ensure both his safety and access to all parts of the vessel. The checklist headings, which indicate the scope of the survey, are as follows:
Infomarine On-Line Technical Library
| File | Description | File size |
|---|
| PI-preparation-inspection.pdf | Your vessel will be undergoing inspection by a P & I provision of P & I cover by Maritime Mutual Insurance Association (NZ) Ltd. | 57 Kb |
|
|
Read more...
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
