| Thickness Measurement and Close-up Survey Guidance Revision 5.5 January 2010 |
 |
 |
 |
 INTRODUCTION- PART 1 Special Survey – Oil Tankers, Ore/Oil Ships, Ore/Bulk/Oil Ships, Chemical Tankers and Ships for Liquefied Gases - PART 2 Special Survey – Dry bulk cargo ships (Bulk Carriers) - PART 3 Special Survey – General dry cargo ships - PART 4 Special Survey – Other ship types - PART 5 Intermediate Survey – All ship types - PART 6 Annual Survey – All ship types - PART 7 Thickness Measurement Report Forms - Appendix 1 Permissible diminution levels for Category 1 Oil Tankers, Chemical Tankers and Liquefied Gas Ships. - Appendix 2 Permissible diminution levels for Category 3 Oil Tankers, Chemical Tankers and Liquefied Gas Ships - Appendix 3 Permissible diminution levels for Category 1 Bulk Carriers, Ore/Oil Ships and Ore/Bulk/ Oil Ships. - Appendix 4 Permissible diminution levels for general dry cargo ships and all other Category 2 and 3 type ships. - Appendix 5 Guidelines on thickness measurements for evaluation of longitudinal strength of hull girder for oil tankers of length 130 metres and over. - Appendix 6 Guidelines on the thickness measurement of cargo hold shell frames on single skin bulk carriers contracted for construction prior to 1 July 1998
|
